RMIT University, Melbourne, Australia
124 La Trobe St, Melbourne VIC 3000, Australia
Phone: +61 3 9925 2000
Our metrology laboratory facilitates a number of nationally and globally unique methods to measure characteristics of materials and structures. Develop your advanced engineering skills and contribute to industry-focused research projects, identifying solutions to electrical and electronic engineering problems.
Balaclava Road, North Ryde, NSW, 2109, Australia
Phone: +61 2 9850 7111
Fax: +61 2 9850 7433
Master of Laboratory Quality Analysis and Management
There is a growing demand for professionals equipped with both scientific and management skills in all modern laboratories including government and commercial environmental laboratories, and medical testing laboratories. All laboratories must demonstrate that they comply with international standards and regulations to be accredited by a dedicated authority.
Developed in collaboration with the National Measurement Institute and the National Association of Testing Authorities, Australia, this course will provide you with the practical experience and knowledge in chemical analysis, as well as the laboratory accreditation requirements that are increasingly demanded by prospective employers in commercial testing laboratories.
Belarusian National Technical University
Kolasa Str, 22, building 17,Minsk, 220013, Belarus
Tel.: 375 17 292-22-01
Standardization, Metrology And Information Systems
The Department of Standardization, Metrology and Information Systems (SMIS) was established in 1961 as a department for training specialists in instrumentation engineering. The Department is one of the oldest structural subdivisions of the BNTU.
The Department has its own website fully reflecting all its multifaceted activities. http://smis.bntu.by/
For over 25 years, the SMIS Department is rated as a leading teaching and research unit in the BNTU responsible for training specialists in the field of standardization, quality management, and metrology.
Instituto de Pesquisas e Estudos Industriais
Av. Humberto de Alencar Castelo Branco, 3972 - Assunção, São Bernardo do Campo - SP, 09850-305, Brazil
Phone: +55 11 4353-2908
FAX: + 5511 419 0999
Founded in 1975, IPEI – Institute of Industrial Research and Studies has a mission to integrate the FEI University with the business world using its teacher’s expertise and infrastructure of FEI University. In addition, IPEI provides technological services performed by its own team, with the highest excellence, involving calibrations, testing and analyses, thus contributing to the economic, social and technological development of the region and of the country.
Pontifical Catholic University of Rio de Janeiro
Rua Marquês de São Vicente, 225, Gávea - Rio de Janeiro, RJ - Brasil, Cep: 22451-900 - Cx. Postal: 38097
Phone: +55 21 3527-1542
Graduate Program in Metrology
Established in 1996, the Graduate Program in Metrology (Post MQI) was, at the time of its creation, an answer of the University to an interministerial effort of the Federal Government in the context of the “RH-Metrologia" Program, to stimulate the development of qualified human resources and metrological culture. In line with the essentially multidisciplinary nature of Metrology, the Program benefits from the conjunction of laboratory skills and infrastructures existing in several departments and units of the Scientific Technical Center at PUC-Rio. Its aims at specializing on the training of well-trained engineers, physicists and chemists, enabling them to work in the interface of their specialties with measurements science.
Train human resources in Metrology in order to meet the demands of the Metrology, Normalization and Industrial Quality National System (Sistema Nacional de Metrologia, Normalização e Qualidade Industrial- Sinmetro).
The Program also meets the specific demands of companies and organizations that desire to guide the training of professionals in specific areas focused on development of competitiveness. Within this context, the Master’s course in Metrology and the Lato Sensu specialization course are offered.
66 Ivan Michailov st., 2700 Blagoevgrad, Bulgaria
Phone: +359 73 88 55 05
FAX: +359 73 88 55 16
The bachelor program of Metrology has duration of 4 years and is designed to prepare professionals of Professional Division natural sciences with qualification name "physicist-specialist of metrology" who knows how to apply physics in research and a wide range of applications activities. Students who have completed the degree "Bachelor" receive theoretical and applied knowledge of basic physical and mathematical disciplines, which enables them to good career, also continue their education in the educational qualifications "Master's Degree". The curriculum of the degree "Bachelor" is designed in accordance with the requirements for specialty agreed with European standards for the level of training. The curriculum contains courses, divided into three categories - mandatory, optional and elective courses that give students the opportunity by electivity courses to receive theoretical and applied knowledge of modern physics departments and their application in other sciences and manufacturing. Specialists who graduate from the program Metrology are able to work in laboratories and quality control centers, to become employees in the State Agency for Metrological and Technical Surveillance or in scientific institutes and laboratories in professional division Physics and related sciences.
Metrology and Measurement Engineering
Metrology and Measurement Engineering Academy (College of measurement) is characteristic of our school College, its predecessor was 1985 Nian measured by the amount of geometry testing, mechanical testing measurement, thermal measurement system consisting of a professional test. 1995 Nian set up a Department of Metrology (measurement engineering), 2002 upgraded to Engineering Measurement Technology, 2007 was renamed the College of Metrology and Measurement Engineering.
299 Doon Valley Drive, Kitchener, Ontario N2G 4M4
Quality Assurance (Ontario College Certificate)
This part-time program would be of interest to people employed in quality engineering functions - quality control and quality assurance, receiving and in-process inspection, and to co-ordinate measuring machine operators, manufacturing technicians and technologists. Topics in quality control and assurance are covered in depth and in a practical and realistic manner. On completion of the program, the graduate will be able to apply the proper techniques and procedures to solve practical manufacturing problems with respect to quality. Graduates will receive a College Certificate which is recognized by industry. This certificate will help in preparing to write the American Society of Quality's certification examinations such as Certified Quality Technician (CQT), or Certified Quality Engineer (CQE), once qualified work experience is obtained.
Fanshawe College, London Campus
1001 Fanshawe College Blvd.
London, Ontario N5Y 5R6
The Quality Assurance Advanced Management Certificate program offers theoretical as well as practical courses to allow the student to become a part of a QA management team. Lean Manufacturing, Six Sigma, project management, quality principles, customer satisfaction and supplier development are the core elements of this program.
599 Brealey Dr, Peterborough, Ontario, Canada K9J 7B1
Attn: John Sillberg
Instrumentation and Control Engineering Technician
This four-semester Ontario College Diploma program will prepare you for a hands-on, exciting and rewarding career in emerging engineering and scientific fields. The program provides valuable and in-demand skills required in today's process, manufacturing, and calibration facilities.
Northern Alberta Institute of Technology
11762 - 106 Street Edmonton, Alberta, Canada, T5G 2R1
Toll Free: 1.877.333.6248
MACHINE-SHOP INSPECTION AND CALIBRATION CERTIFICATE
Experience the challenging world of machine shop inspection and calibration. This program encompasses the principles of dimensional metrology, focusing on the precise measurement of machined components. Students will explore a wide range of manufacturing solutions which help industry to reach higher quality standards.
Students will learn to properly select and calibrate measuring instruments and measure precise work, as typically carried out in a manufacturer's standards room or inspection department. Students will also learn the range of measuring concepts and mathematics used in the standards room environment, and will receive practical, hands-on experience.
Red River College
Notre Dame Campus
2055 Notre Dame Ave.
Winnipeg, MB R3H 0J9
Two-year diploma, September entry date, Notre Dame Campus, Winnipeg. Credit transfer opportunities: high school credits, university credits, credit toward apprenticeship International applicants please visit Academic Program, Dates and Fees for a listing of programs for international students, current availability and online application instructions This program prepares you for a career as a manufacturing technician with knowledge of manufacturing processes including conventional machining and metal forming operations, composites, and advanced manufacturing methods. The program gives you an introduction to robotics and automation, non-destructive testing, dimensional metrology, and quality inspection methods. \Upon completion of the program you will receive a Manufacturing Technician Diploma.
1750 Finch Ave E, North York, Ontario M2J 2X5, Canada
Quality Assurance (Seneca College Certificate)
This program has been developed in consultation with the Toronto Chapter of the American Society for Quality (ASQ). In today's world, quality competition is a fact of life. Companies require a workforce proficient in the principles and practices of quality control. Originally developed and sponsored by the American Society for Quality (ASQ), Toronto Chapter, this program provides a theoretical and practical background in the field of Quality Assurance.
University of China Metering, Hangzhou
Zhejiang Science Higher Education Park, 310018, Zhejiang ICP
International Exchange and Cooperation Division of China Jiliang University
No. 258, Xueyuan Street, Higher Education Zone of Xiasha, Hangzhou, Zhejiang, China
Phone: +86-571-86836028, 86836086
China Jiliang University (CJLU)
International Exchange and Cooperation Division of China Jiliang University
China Jiliang University (CJLU) is the only university dedicated to quality supervision, inspection and quarantine in the world, and a key university in Zhejiang Province with a distinct focus on those features. CJLU, the sole university named after Metrology (Jiliang) in the world, is the first choice for any country seeking to exchange talents and cooperation in this field.
University of Costa Rica
"Rodrigo Facio Brenes" Montes de Oca, San José Costa Rica
Postal Code 2060 San José.
Phone: (506) 2511-0000
Fax: (506) 2224-8214
El laboratorio de Metrología de la Universidad de Costa Rica (Programa De Formación Profesional)
The purpose of the program is to train metrology level professionals who work in quality departments, such as inspectors or supervisors, industrial calibration technicians, quality managers or processes. LABCAL, aims to establish in connection with the needs of the country at the metrological level. Therefore, the program is constantly being restructured to meet the demand for new metrology professionals.
University of Tartu
Applied Measurement Science (AMS), Ülikooli 18, 50090 Tartu, Estonia
Phone: +372 737 5100
AMS is a 120 ECTS international master’s program, where teaching and research is carried out in the brand-new “Physicum” and “Chemicum” buildings in Tartu, – the top research and education facilities in Northern Europe. Please see this recent presentation for a more information. This Video gives some idea about how it is to study at Tartu.
Aalto University, Metrology Research Institute
Aalto University School of Electrical Engineering
Metrology Research Institute, Otakaari 5A, 02150 Espoo
Phone: +358-9-470 22433
FAX: +358-9-470 22222
The research activities at Metrology Research Institute involve electronics, modern optics and optical radiation measurements. The special research areas are the optical quantities of photometry and radiometry, laser based length metrology and optical telecommunication. The Metrology Research Institute is the national standards laboratory for optical quantities. The Metrology Research Institute is a joint laboratory of Aalto University and MIKES and it is involved in many national and international projects. Metrology research group is led by Professor Erkki Ikonen. For other staff members, see Contact information.
Ecole Supérieure de Métrologie
Ecole des Mines de Douai
Dpt Métrologie-Qualité, 941 rue Charles Bourseul, BP838 – 59508 DOUAI Cedex, FRANCE
Phone: +33 (0) 188.8.131.52.46
FAX: +33 (0) 184.108.40.206.19
Our specialization training of the “Mastère spécialisé en Systémes de Mesure et Métrologie” de l’Ecole Nationale Supérieure des Mines de Douai, built on one year, according to a theoretical curriculum for seven months and a vocational training in firm for four months. This training can answer to that expectation, for holders of an engineer diploma or an academic training in third cycle. The presentation of the pedagogical program and the schooling are described on our web site: www.esm.fr.
University of Reims Champagne Ardenne
Villa Douce, 9 bd de la paix, 51097 REIMS cedex, FRANCE
Professional Undergraduate Degree in Sensors, Instrumentation, Metrology (CIM)
The professional Undergraduate Degree in Sensors – Instrumentation – Metrology, available in the Physical Measurements Department of Reims’ University Institute of Technology (IUT) aims at providing students with the scientific necessary skills to create an instrumentation line, from selecting sensors, to finally analysing and processing the obtained measures. The Degree is meeting the needs that companies have to fully control test procedures when it comes to quality. This requires the possibility to rely on the available tools and have a thorough knowledge in metrology.
Braunschweig International Graduate School of Metrology (IGSM)
Technical University of Braunschweig, Hans-Sommer-Strasse 66, D-38106 Braunschweig
Phone: +49 531 391-3877
Technische Universität Braunschweig and the Physikalisch-Technische Bundesanstalt (PTB), joined forces to establish an international metrological training centre – the Braunschweig International Graduate School of Metrology (B-IGSM) to foster metrological knowledge in all areas of science and engineering. Our research felds are in particular Metrology for Society, Industrial Metrology and Fundamentals of Metrology. The research areas of the Graduate School are thus open to students from all scientific areas with a strong link to metrology.
Friedrich-Alexander-Universität Erlangen-Nürnberg FAU
Schlossplatz 4, 91054 Erlangen, Germany
Contact: Elisabeth Bächle-Grosso, Dipl.-Ing.
Organization: Department of Academic Affairs and Student Services
Working group: Office of Student Advice and Career Service
Phone number: +49 9131 85-24809
MSc in Advanced Optical Technologies
Foundations of the first year of studies:
- Mathematics in Optics
- Foundations of Optics
- Foundations of Lasers
- Optical Systems and Applications
- Scientific techniques
Advanced lectures in six topics:
- Optical Metrology
- Optical Material Processing
- Optics in Medicine
- Optics in Communication and IT
- Optical Materials and Systems
Technische Universität Ilmenau
Ehrenbergstrasse 29, 98693 Ilmenau
Phone: +49 3677 69-0
FAX: +49 3677 69-5009
Postadresse: Postfach 10 05 65, 98684 Ilmenau
Master Mechanical Engineering: Measurement and sensor technology
The knowledge in the field for Process Measurement and Sensor Technology is further amplified in the lectures offered by the Institute in the master's degree program. The Institut for Proces Measurement offers the field of study of measurement and sensor technology in the master's degree program of mechanical engineering. It includes elective topics with the subjects manufacturing and laser metrology, nanometrology, force measuring and weighing technology, temperature measurement, thermal measurement technology and further and the electoral catalog with various subjects such as flow measurement technology, coordinate metrology, optical metrology, measurement data analysis and measurement uncertainty and sensor technology in motor vehicles.
There are various advanced metrology modules in master's degree program in electrical engineering and information technology with major field of study of automation technology. Courses for Measurement and Sensor Technology are also available for Master students specialized in industrial engineering/ mechanical engineering.
Institute of Technology Sligo
Ash Lane, Sligo, F91 YW50, Ireland
Tel: + 353 (0)71 91 55222
BEng in Precision Engineering and Design
Precision engineering is a specialist branch of mechanical engineering which involves the design and manufacture of complex products, machines, tools and instruments, whose parts must be precisely correct in size and shape, have exceptionally tight tolerances and be produced repeatedly to exact specifications. Precision engineering is often defined as having an accuracy of1x106 - that’s one millionth of a metre, or 1 micron.
The manufacturing companies that now operate in Ireland typically design and make sophisticated products, almost always in very large quantities and with high level of precision.
This Precision Engineering programme will focus on:
- Precision Design – product, mould, tool and machine design
- Computer Aided Manufacture – CNC (Computer Numerical Control) programming & machining
- Advanced Manufacturing Technologies – automation, polymer processing, materials
- Metrology – Precision measurement and CMM (Coordinate Measuring Machine)
- Manufacturing Requirements – validation, quality management, lean manufacturing and project management