Southern US Region - Tennessee Section (1224)

 
Register Here

NCSLI Coordinators Name:
Mike Duncan
Oak Ridge National Laboratory
1 Bethel Valley Rd, Building 5510A
Oak Ridge, TN 37830
Office: 865-574-3749

Meeting Time:
8:00 AM

Cost to attend meeting:
No cost

Meeting Host:
Tennessee Technological University 

Meeting Location:
Roaden Student Center, Tech Pride Room, Cookeville, TN

Meeting Directions:
From Nashville: Take Interstate 40 east to exit 287 (Jefferson Avenue); travel north on Jefferson Avenue for approximately 1 3/4 miles to the courthouse square. Turn left onto Broad Street go one block; turn right onto Dixie Avenue. Follow Dixie Avenue to campus.

From Knoxville: Take Interstate 40 west to exit 287 (Jefferson Avenue); travel north on Jefferson for approximately 1 3/4 miles to the courthouse square; Turn left onto Broad Street and go one block; turn right onto Dixie Avenue. Follow Dixie Avenue to campus.

From Chattanooga: Take Highway 111 North to Interstate 40. Travel I-40 west to exit 287 (Jefferson Avenue), approximately one mile; travel north on Jefferson for approximately 1 3/4 miles to the courthouse square; Turn left onto Broad Street and go one block; turn right onto Dixie Avenue. Follow Dixie Avenue to campus.

From Kentucky: Take Highway 111 South to Interstate 40. Travel I-40 west to exit 287 (Jefferson Avenue), approximately one mile; travel north on Jefferson for approximately 1 3/4 miles to the courthouse square; Turn left onto Broad Street and go one block; turn right onto Dixie Avenue. Follow Dixie Avenue to campus

Meeting Speaker (s):                             
Speakers’ Name: Dilip Shah
Topic: Skillsets Every Metrology Engineer Should Have

Speakers’ Name: Clive Warren, Renishaw, Inc.
Topic: Laser Interferometry for Dimensional Measurements

Speakers’ Name: Suzanne Canning, Y-12 National Security Complex
Topic: CMM Uncertainty Budgeting Using Acceptance Testing Results

Speakers’ Name: Steve Stahley, Cummings, Inc .
Topic: What is a Metrologist, Anyway: Description of a Six Sigma Project to Work with Universities to Incorporate Metrology into Curricula

Meeting Agenda:

8:00 - 8:30 AM Registration and Greeting Time
8:30 –8:50 AM Welcome and Introductions

8:50 – 9:50 AM Dilip Shah.
9:50 – 10:00 AM Break
10:00 – 11:00 AM Laser Interferometry for Dimensional Measurements, Clive Warren, Renishaw, Inc.
11:00 – 11:15 AM Group Photograph
11:15 -12:15 AM Lunch
12:15 – 1:15 PM CMM Uncertainty Budgeting, Suzanne Canning, Y-12 National Security Complex.
1:15- 1:30 Break
1:30 – 2:30 PM Roundtable Discussion: Educational Needs for Metrology/Instrument Technicians for the Tennessee Valley Workplaces—TVA, Y-12 Plant, Volkswagen, Tennessee Eastman, Denso and others.
2:30 – 3:30 PM What is a Metrologist, Anyway: Description of a Six Sigma Project to Work with Universities to Incorporate Metrology into Curricula, Steve Stahley, Cummings, Inc.
3:30 – 4:00 PM Close of meeting, door prizes, fall meeting date, and Tour Instructions
4:00 – 5:00 PM Tour of Tennessee Tech Facilities.