REGISTER NOW
TE-1 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 2
Course Title: Balance and Scale- Good Weighing Practices
Instructor: Ian Ciesniewski, Mettler Toledo
Course Description
TE-2 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 4
Course Title: Time and Frequency Measurements Using GPS
Instructor: Michael Lombardi, National Institute of Standards and Technology (NIST)
Course Description
TE-3 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Legacy South 3
Course Title: Risk Based Thinking in Metrology
Instructor: Andrew Oldershaw, National Research Council of Canada (NRC)
Course Description
TE-4 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum West 1
Course Title: Measurement Uncertainty: Best Practices
Instructor: Dilip Shah, E = mc3 Solutions
Course Description
TE-5 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) |Rm: Forum West 3
Course Title: Internal Auditing of your ISO/IEC 17025 Accredited Laboratory
Instructor: Helga Alexander, International Accreditation Service (IAS)
Course Description
TE-6 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Symposium West
Course Title:: Improving the Accuracy of Dynamic Force Measurements
Instructor: Dr. Ako Chijioke, National Institute of Standards and Technology (NIST)
Course Description
TE-7 | Mon & Tues, February 25 & 26 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Symposium East
Course Title: Flow Measure and Uncertainties
Instructor: Dr. John Wright,
National Institute of Standards and Technology (NIST)
Course Description
TE-8 | Mon & Tues, February 25 & 26 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Forum East 3
Course Title: Selection, Calibration, and Use of Contact Thermometers
Instructor: Dawn Cross, National Institute of Standards and Technology (NIST)
Course Description
TE-9 | Tuesday, February 26 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 4
Course Title: ISO/IEC 17025:2017 Gap in Spanish
Instructor: Marcella Shkolnik, American Association for Laboratory Accreditation (A2LA)
Course Description
TE-10 | Tuesday, February 26 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 2
Course Title: Introduction to Calibrating RF Power Meters
Instructor: Andy Brush, Tegam
Course Description
TE-11 | Tuesday, February 26 | 8:00 AM - 12:00 PM | Half-Day (4 Hours) | Rm: Forum West 3
Course Title: Industrial Pressure Calibration and Measurements
Instructor: Dallen Baugh, Additel Corporation
Course Description
TE-12 | Tuesday, February 26 | 1:00 PM - 5:00 PM | Half-Day (4 Hours) | Rm: Forum West 2
Course Title: Dynamic Sensors and Calibration
Instructor: Patrick Timmons, The Modal Shop
Course Description
TE-13 | Tuesday, February 26 | 1:00 PM - 5:00 PM | Half-Day (4 Hours) | Rm: Forum West 3
Course Title: Theory and Operation of Dry-Block Temperature Calibrators
Instructor: Scott Crone, Ametek
Course Description
TE-14 | Tuesday, February 26 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Symposium West
Course Title: Dimensional Uncertainties Workshop
Instructor: Eric Stanfield,
National Institute of Standards and Technology (NIST)
Course Description
TE-15 | Tues & Wed, February 26 & 27 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Legacy South 3
Course Title: Measurement Decision Risk for Conformity Assessment
Instructor: Scott Mimbs, Consultant, Sponsored by American Association of Laboratory Accreditation (A2LA)
Course Description
TE-16 | Tues & Wed, February 26 & 27 | 8:00 AM - 5:00 PM | 2-Day AM (16 Hours) | Rm: Forum West 1
Course Title: The NIST Uncertainty Machine and the NIST Consensus Builder
Instructor: Antonio Possolo PhD, National Institute of Standards and Technology (NIST)
Course Description
TE-17 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Symposium East
Course Title: AC Measurements and Measurement parasites particular to AC Calibrating Torque Instruments
Instructor: Mark Evans, Guildline Instruments
Course Description
TE-18 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum West 3
Course Title: Calibrating Torque Instruments
Instructor: Lloyd Baker, General Motors
Course Description
TE-19 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Form East 4
Course Title: Fundamentals of Humidity Measurement
Instructor: Michael Boetzkes, Consultant, Sponsored by Rotronic
Course Description
TE-20 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 2
Course Title: Active Asset Management
Instructor: James Smith, The Boeing Company
Course Description
TE-21 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day AM (8 Hours) | Rm: Forum West 2
Course Title: Applying Risk Management Tools to Make Business Decisions
Instructor: Tim Osborne, American Association of Laboratory Accreditation (A2LA)
Course Description
TE-22 | Wednesday, February 27 | 8:00 AM - 12:00 PM | 1/2-Day AM (4 Hours) | Rm: Forum East 3
Course Title: Understanding Pass/Fail Measurement Decision Risk
Instructor: Jonathan Harben, Keysight Technologies
Course Description