Training Program 2019

NCSL International 2019 Technical Exchange Program
Download and send to a friend

TE-1 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 2
Course Title: Good Weighing Practices 
Instructor: Ian Ciesniewski, Mettler Toledo
Course Description

TE-2 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 4
Course Title: Time and Frequency Measurements Using GPS
Instructor:
Michael Lombardi, National Institute of Standards and Technology (NIST)
Course Description

TE-3 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Legacy South 3
Course Title: Risk Based Thinking in Metrology
Instructor:
Isabelle Amen, National Research Council of Canada (NRC)
Course Description

TE-4 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum West 1
Course Title: Measurement Uncertainty: Best Practices
Instructor:
Dilip Shah, E = mc3 Solutions
Course Description

TE-5 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) |Rm: Forum West 3
Course Title: Internal Auditing of your ISO/IEC 17025 Accredited Laboratory
Instructor:
Helga Alexander, International Accreditation Service (IAS) 
Course Description

TE-6 | Monday, February 25 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Symposium West
Course Title: Geometric Dimensioning and Tolerancing (GD&T): Application to Gage Calibration Requirements
Instructor:
E.A. “Tony” Bryce, Sandia National Laboratories
Course Description

TE-7 | Mon & Tues, February 25 & 26 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Symposium East
Course Title: Flow Measure and Uncertainties
Instructor:
 Dr. John Wright, National Institute of Standards and Technology (NIST)
Course Description

TE-8 | Mon & Tues, February 25 & 26 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Forum East 3
Course Title: Selection, Calibration, and Use of Contact Thermometers
Instructor: 
Dawn Cross, National Institute of Standards and Technology (NIST)
Course Description

TE-9 | Tuesday, February 26 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 4
Course Title: ISO/IEC 17025:2017 Gap in Spanish
Instructor:
Marcela Shkolnik, American Association for Laboratory Accreditation (A2LA)
Course Description

TE-10 | Tuesday, February 26 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 2
Course Title: Introduction to Calibrating RF Power Meters
Instructor:
Andy Brush, Tegam
Course Description

TE-11 | Tuesday, February 26 | 8:00 AM - 12:00 PM | Half-Day (4 Hours) | Rm: Forum West 3
Course Title: Industrial Pressure Calibration and Measurements
Instructor:
Dallen Baugh, Additel Corporation
Course Description

TE-12 | Tuesday, February 26 | 1:00 PM - 5:00 PM | Half-Day (4 Hours) | Rm: Forum West 2
Course Title: Dynamic Sensors and Calibration
Instructor:
Patrick Timmons, The Modal Shop
Course Description

TE-13 | Tuesday, February 26 | 1:00 PM - 5:00 PM | Half-Day (4 Hours) | Rm: Forum West 3
Course Title: Theory and Operation of Dry-Block Temperature Calibrators
Instructor:
Scott Crone, Ametek
Course Description

TE-14 | Tuesday, February 26 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Symposium West
Course Title: Dimensional Metrology Hands-on Workshop
Instructors:
Ted Doiron, National Institute of Standards and Technology (NIST)
Eric Stanfield, National Institute of Standards and Technology (NIST)
Course Description

TE-15 | Tues & Wed, February 26 & 27 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Legacy South 3
Course Title: Measurement Decision Risk for Conformity Assessment
Instructor:
Scott Mimbs, Consultant, Sponsored by American Association of Laboratory Accreditation (A2LA)
Course Description

TE-16 | Tues & Wed, February 26 & 27 | 8:00 AM - 5:00 PM | 2-Day (16 Hours) | Rm: Forum West 1
Course Title: The NIST Uncertainty Machine and the NIST Consensus Builder
Instructor:
Antonio Possolo PhD, National Institute of Standards and Technology (NIST)
Course Description

TE-17 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Symposium East
Course Title: AC Measurements and Measurement Parasites Particular to AC
Instructor:
Mark Evans, Guildline Instruments
Course Description

TE-18 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum West 3
Course Title: Calibrating Torque Instruments
Instructor:
Lloyd Baker, General Motors
Course Description

TE-19 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 4
Course Title: Fundamentals of Humidity Measurement
Instructor:
Michael Boetzkes, Consultant, Sponsored by Rotronic
Course Description

TE-20 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day (8 Hours) | Rm: Forum East 2
Course Title: Active Asset Management
Instructor:
James Smith, The Boeing Company
Course Description

TE-21 | Wednesday, February 27 | 8:00 AM - 5:00 PM | 1-Day AM (8 Hours) | Rm: Forum West 2
Course Title: Applying Risk Management Tools to Make Business Decisions
Instructor:
Tim Osborne, American Association of Laboratory Accreditation (A2LA)
Course Description

TE-22 | Wednesday, February 27 | 8:00 AM - 12:00 PM | 1/2-Day AM (4 Hours) | Rm: Forum East 3
Course Title: Understanding Pass/Fail Measurement Decision Risk
Instructor:
Jonathan Harben, Keysight Technologies
Course Description

 

REGISTER NOW



Sponsors | Exhibitors