NCSL International Workshop & Symposium 2018

NCSL International Workshop & Symposium 2018
Measurement of Tomorrow The long-anticipated redefinition of the SI base units in 2018 will constitute a revolutionary and historic transformation in the world of metrology. But how will it affect the day-to-day work of standards labs and their personnel? Defining each base unit in terms of the fixed value of a physical constant not only removes the last artifact standard and provides a uniform conceptual basis for the entire system; it also makes scalable measurements readily achievable across orders of magnitude. But what changes will it require in the instruments and methodology we use, and the tests and evaluations we perform? It is likely that, as a practical matter, the new definitions will result in no, or extremely minimal, discernible impact on the results we deliver to customers, with expected differences in a few calibrations limited to the range of parts per million • well below the level of significance to most of industry and commerce.
When
8/25/2018 - 8/30/2018
Where
777 NE Martin Luther King Jr Blvd
Portland, OR 97232 United States

Sign In

Program

   

Saturday, 25 August 2018

 
Category
Registration
Time
8/25/2018 8:00 AM - 8/30/2018 5:00 PM
8:00 AM
ISO/IEC 170252017 - The Main Changes and the Change of Emphasis in this New Version
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Decision Rules and Making Statements of Compliance with Confidence
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Active Asset Management
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Running the Effective Laboratory Better • Data Driven Improvements that Matter
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Applying LEAN in a Calibration Lab Environment
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
The Road to Accreditation: Implementing ISO/IEC 17025:2017 and Accrediting Body Accreditation Requirements
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Microwave Network analysis, Power Calibrations and Noise Figure measurements
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Selection, Calibration, and Use of Contact Thermometers
Category
Tutorial
Time
8/25/2018 8:00 AM - 8/26/2018 5:00 PM
8:00 AM
The NIST Uncertainty Machine and the NIST Consensus Builder
Category
Tutorial
Time
8/25/2018 8:00 AM - 8/26/2018 5:00 PM
8:00 AM

Sunday, 26 August 2018

 
Risk Based Thinking
Category
Tutorial
Time
8/26/2018 8:00 AM - 8/27/2018 12:00 PM
8:00 AM
Effective Calibration Interval Analysis
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
The Ins and Outs of Applying for and Maintaining ISO/IEC 17025 Accreditation: Challenges and tips for success
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
"The Book" on Resistance and High Current Measurements
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Pressure Metrology
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Introduction to Photonics
Category
Tutorial
Time
8:00 AM - 12:00 PM
8:00 AM
Realization and Dissemination of Mass in the “New SI”
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Evaluating Uncertainty and Risk: A Hands-On Approach
Category
Tutorial
Time
8/26/2018 8:00 AM - 8/27/2018 5:00 PM
8:00 AM

Monday, 27 August 2018

 
Calibration Management Software - How to Select and Implement for Your Environment
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Evaluation of Measurement Uncertainty in Conformity Assessment of Measuring Instruments
Category
Tutorial
Time
8:00 AM - 5:00 PM
8:00 AM
Industrial Pressure Calibration and Measurements
Category
Tutorial
Time
8:00 AM - 12:00 PM
8:00 AM
Vibration and Shock Sensor Theory and Calibration
Category
Tutorial
Time
8:00 AM - 12:00 PM
8:00 AM
Force Calibrations
Category
Tutorial
Time
8:00 AM - 12:00 PM
8:00 AM
Radiation Thermometry Fundamentals
Category
Tutorial
Time
8:00 AM - 12:00 PM
8:00 AM
Fundamentals of Humidity Measurement
Category
Tutorial
Time
8:00 AM - 12:00 PM
8:00 AM
High Power Measurement and Wattmeter Calibration
Category
Tutorial
Time
8:00 AM - 12:00 PM
8:00 AM
Understanding Pass/Fail Measurement Decision Risk and how to comply with ISO/IEC 17025:2017
Category
Tutorial
Time
1:00 PM - 5:00 PM
1:00 PM
Good Weighing Techniques
Category
Tutorial
Time
1:00 PM - 5:00 PM
1:00 PM
Fundamentals of Torque Calibration
Category
Tutorial
Time
1:00 PM - 5:00 PM
1:00 PM
Relative Humidity Generation for Calibration
Category
Tutorial
Time
1:00 PM - 5:00 PM
1:00 PM
Time and Frequency Measurements Using GPS
Category
Tutorial
Time
1:00 PM - 5:00 PM
1:00 PM
Oscilloscope Calibration Uncertainties
Category
Tutorial
Time
1:00 PM - 5:00 PM
1:00 PM
Theory and Operation of Dry-Block Temperature Calibrators
Category
Tutorial
Time
1:00 PM - 5:00 PM
1:00 PM

Tuesday, 28 August 2018

 
Category
Registration
Time
8:00 AM - 5:30 PM
8:00 AM

Wednesday, 29 August 2018

 
Category
Registration
Time
8:00 AM - 5:30 PM
8:00 AM

Thursday, 30 August 2018

 
Category
Registration
Time
8:00 AM - 5:00 PM
8:00 AM

Friday, 31 August 2018

 
Category
Tour
Time
8:30 AM - 3:00 PM
8:30 AM


Trouble registering online? Please call the business office at 303-440-3339 or email
info@ncsli.org and we will register you!