Accreditation

Standards

Monday 02/24/20 (1:00 PM - 5:00 PM) 1/2-Day PM
  TAC-4 | Internal Auditing of your ISO/IEC 17025 Accredited Laboratory
Helga Alexander, International Accreditation Service (IAS) 

Wednesday 02/26/20 (8:00 AM - 5:00 PM) 1-Day
   TAC-5 | ISO/IEC 17025:2017 Gap in Spanish
Marcela Shkolnik, American Association for Laboratory Accreditation (A2LA)

Policy

Tuesday 02/25/20 (8:00 AM - 5:00 PM) 1-Day
  TAC-1 | An Introduction to the ILAC Policy (P Series) and Guidance (G Series) Documents: A Peek Behind the Accreditation Body Curtain
Rob Knake, American Association for Laboratory Accreditation (A2LA)

Dimensional Measurements

Uncertainty

Monday and Tuesday 02/24-25/20 (8:00 AM - 5:00 PM) 2-Day
  TDM-1 | Dimensional Uncertainties Hands-on Course
Dr. Ted Doiron and Eric Stanfield, National Institute of Standards and Technology (NIST)

Wednesday 02/26/20 (8:00 AM - 5:00 PM) 1-Day
  TDM-3 | Evaluation of Measurement Uncertainty in Conformity Assessment of Measuring Instruments
Jim Salsbury PhD, Mitutoyo America Corporation

Calibration

Tuesday 02/25/20 (8:00 AM - 5:00 PM) 1-Day
  TDM-2 | Introduction to Dimensional Calibration
Jim Salsbury PhD and Amosh Kumar, Mitutoyo America Corporation

Mechanical

Wednesday 02/26/20 (8:00 AM - 5:00 PM) 1-Day
  TDM-5 | Precision Metrology Using Coordinate Measuring Machines
John Stoup, National Institute of Standards and Technology (NIST)

Electrical Measurements

Current & Resistance

Monday 02/24/20 (8:00 AM - 5:00 PM) 1-Day
  TEM-3 | AC Current and Resistance Measurements and Principles
Mark Evans, Guildline Instruments Limited 

Wednesday |  02/26/20 (8:00 AM - 12:00 PM) 1/2 Day AM NEW!
  TEM-4 | Low Power RF Power Sensor Calibration
Greg Tolentino, Tegam, Inc.

Wednesday |  02/26/20 (1:00 PM - 5:00 PM) 1/2 Day PM NEW!
  TEM-5 | High Power Measurement and Wattmeter Calibration
Andy Brush, Tegam, Inc.

Mass Measurements

Mass

Monday 02/24/20 (8:00 AM - 5:00 PM) 1-Day
  TMA-3 | Good Weighing Practices
Ian Ciesniewski, Mettler Toledo

Metrology Engineers

Uncertainty

Monday & Tuesday 02/24-25/20 (8:00 AM - 5:00 PM) 2-Day
  TME-1 | The NIST Uncertainty Machine and the NIST Consensus Builder
Antonio Possolo, National Institute of Standards and Technology (NIST)

Wednesday 02/26/20 (8:00 AM - 5:00 PM) 1-Day
  TME-2 | Measurement Uncertainty: Best Practices
Dilip Shah, E=mc³ Solutions

Metrology Management 

Metrology Overview

Monday & Tuesday 02/24-25/20 (8:00 AM - 5:00 PM) 2-Day
  TMM-4 | Overview of Fundamentals of Metrology
Georgia Harris, National Institute of Standards and Technology (NIST)
Lisa Corn, Texas Department of Agriculture

Test and Measurement Equipment (T&ME)

Tuesday 02/25/20 (8:00 AM - 5:00 PM) 1-Day
  TMM-2 | Understanding Instrument Specifications
Michael Johnston, Fluke Calibration

Quality & Business

Wednesday 02/26/20 (8:00 AM - 12:00 PM) 1/2-Day AM
  TMM-5 | Reviewing Supplier Provided Calibration Certificates
James Smith, The Boeing Company

Wednesday 02/26/20 (1:00 PM -5:00 PM) 1/2-Day PM | CANCELLED
 TMM-6 | True Cost of Lab Quality (Customers)
James Smith, The Boeing Company

Pressure Measurements

Pressure

Monday & Tuesday 02/24-25/20 (8:00 AM - 5:00 PM) 2-Day
  TPM-3 | Pressure and Vacuum Metrology
Jacob Ricker, National Institute of Standards and Technology (NIST)

Industrial

Sensors

Sensors

Monday 02/24/20 (1:00 PM - 5:00 PM) 1/2-Day PM
  TSM-2 | Dynamic Pressure and Acoustic Calibration
Patrick Timmons, The Modal Shop 

Risk Management

Management

Thermodynamic Measurements

Temperature

Wednesday 02/26/20 (8:00 AM - 12:00 PM) 1/2-Day AM
  TTM-3 | Fundamentals of Temperature Measurement and Calibration
Mike Coleman, Fluke Calibration 

Wednesday 02/26/20 (1:00 PM - 5:00 PM) 1/2-Day PM
  TTM-4 | Advanced Topics of Temperature Measurement and Calibration
Mike Coleman, Fluke Calibration 

Monday 02/24/20 (8:00 AM - 12:00 PM) 1/2-Day AM
  TTM-7 | Theory and Operation of Dry-Block Temperature Calibrators
Scott Crone, Ametek

Exhibitors | Sponsors





























Media Sponsor